Wheel Loaders

HomeIndustriesWheel LoadersModel Information

930M Ag Handler Small Wheel Loader

Overview
Specifications
Equipment

Product Description

The Cat? 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Product Specifications

UnitsUSMetric

 

Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
141 HP 105 kW
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP 119 kW
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*)
158 HP 116 kW
Engine Model
Cat? C7.1
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min 1600 r/min
Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*)
154 HP 115 kW
Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP 121 kW
Buckets
Bucket Capacities
3.1-5.0 m3 (4.0-6.5 yd3)
Weights
Operating Weight
31876 lb 14459 kg
Engine
Maximum Gross Power
170 HP 127 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Reach - Bucket at 45°*
4.67 ft 1424 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4351 psi 30000 kPa
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Turning Radius - Inside of Tires
9.33 ft 2851 mm
Engine
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592 ft·lbf 804 N·m
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
8.2 s 8.2 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
7.5 s 7.5 s
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Rack Angle at Full Lift
51 degrees
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)
572 ft·lbf 776 N·m
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Dump Angle at Full Lift
44 degrees
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns 3.5 turns
Tires
Standard Size
20.5 R25, radial (L-3)
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Dig Depth**
5.3 in 135 mm
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Departure Angle
33 degrees
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US) 8.5 l
Steering
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2.4 s 2.4 s
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Height - Bucket Pin**
14.42 ft 4400 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
4061 psi 28000 kPa
Maximum Flow - Implement Pump
50 gal/min 190 l/min
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Tipping Load - Straight - ISO 14397-1*
16430 lb 7453 kg
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Breakout*
17246 lb 7823 kg
Service Refill Capacities
Cooling System
7.9 gal (US) 30 l
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Tipping Load - Straight - ISO 14397-1*
16070 lb 7290 kg
Engine
Displacement (Standard Power Mode: Speed Range 1-3*)
427 in3 7.01 l
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Clearance - Level Bucket**
13.33 ft 4073 mm
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min 160 l/min
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) 19 l
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Clearance - Bucket at 45° *
10.17 ft 3107 mm
Engine
Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4)
157 HP 117 kW
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Turning Radius - Over Bucket
20.92 ft 6392 mm
Length - Overall*
27.25 ft 8323 mm
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Length - Wheel Base
9.83 ft 3000 mm
Service Refill Capacities
Fuel Tank
51.5 gal (US) 195 l
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min 190 l/min
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Width - Over Tires
8.33 ft 2540 mm
Steering
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf 37620 N·m
Tires
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Clearance - Level Bucket**
13.33 ft 4073 mm
Steering
Maximum Flow - Steering Pump
34 gal/min 130 l/min
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
1.6 s 1.6 s
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Rack Angle at Carry
48 degrees
Steering
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf 50375 N·m
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Height - Ground Clearance**
1.25 ft 397 mm
Height - Overall**
18.67 ft 5697 mm
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Length - Overall*
27.58 ft 8425 mm
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Clearance - Bucket at 45° *
10.42 ft 3177 mm
Rack Angle at Carry
48 degrees
Note (2)
**Vary with tire.
Breakout*
18808 lb 8532 kg
Length - Wheel Base
9.83 ft 3000 mm
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Width - Bucket
9 ft 2750 mm
Loader Hydraulic System
Note
*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Dump Angle at Full Lift
44 degrees
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Length - Hitch to Front Axle
4.92 ft 1500 mm
Turning Radius - Outside of Tires
17.67 ft 5402 mm
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Operating Weight*
31876 lb 14459 kg
Engine
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min 1800 r/min
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Width - Tread Center
6.25 ft 1930 mm
Buckets
Bucket Capacities - Light Material
3.1-5.0 m3 (4.0-6.5 yd3)
Service Refill Capacities
Axles - Rear
6.6 gal (US) 25 l
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Length - Rear Axle to Bumper
6.5 ft 1993 mm
Engine
Displacement (Performance Power Mode: Speed Range 1-4)
427 in3 7.01 l
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US) 165 l
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Reach - Bucket at 45°*
4.42 ft 1350 mm
Transmission
Forward and Reverse - Range 2
8 mile/h 13 km/h
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4)
162 HP 119 kW
Transmission
Forward and Reverse - Range 4
25 mile/h 40 km/h
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Articulation Angle
40 degrees
Dig Depth**
5.3 in 135 mm
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)
572 ft·lbf 776 N·m
Service Refill Capacities
Engine Crankcase
5.3 gal (US) 20 l
Tires
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Clearance - Loadover Height**
11.58 ft 3550 mm
Steering
Maximum Working Pressure - Steering Pump
3500 psi 24130 kPa
Engine
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)
143 HP 107 kW
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
1.8 s 1.8 s
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Height - Ground Axle Center**
2.17 ft 685 mm
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*)
566 ft·lbf 768 N·m
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Loader Hydraulic System
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
1.8 s 1.8 s
Transmission
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
4061 psi 28000 kPa
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Width - Over Tires
8.33 ft 2540 mm
Articulation Angle
40 degrees
Width - Bucket
9 ft 2750 mm
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf 804 N·m
Service Refill Capacities
Axles - Front
6.9 gal (US) 26 l
Hydraulic Tank
23.8 gal (US) 90 l
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Tipping Load - Full Turn - ISO 14397-1*
13934 lb 6320 kg
Steering
Steering Articulation Angle - Each Direction
40°
Axles
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Turning Radius - Over Bucket
21.92 ft 6427 mm
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
4061 psi 28000 kPa
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Turning Radius - Inside of Tires
9.33 ft 2851 mm
Rack Angle at Full Lift
51 degrees
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Height - Ground to Beacon**
12.08 ft 3707 mm
Height - Overall**
19 ft 5802 mm
Engine
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 HP 127 kW
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Operating Weight*
32136 lb 14577 kg
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Turning Radius - Outside of Tires
17.67 ft 5402 mm
Engine
Note (2)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Carry Height - Bucket Pin
2 ft 613 mm
Clearance - Loadover Height**
11.58 ft 3550 mm
Cab
Note (2)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Axles
Front
Fixed; Locking differential (standard)
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Height - Ground to Beacon**
12.08 ft 3707 mm
Loader Hydraulic System
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
4.3 s 4.3 s
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Carry Height - Bucket Pin
2 ft 613 mm
Engine
Note (3)
*Range 4 power is boosted to be the same as Performance Mode.
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Height - Ground to Cab**
10.92 ft 3340 mm
Note (1)
*Vary with bucket.
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Tipping Load - Full Turn - ISO 14397-1*
13592 lb 6166 kg
Height - Ground to Cab**
10.92 ft 3340 mm
Loader Hydraulic System
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1.4 s 1.4 s
Engine
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP 125 kW
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Length - Hitch to Front Axle
4.92 ft 1500 mm
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Height - Bucket Pin**
14.42 ft 4400 mm
Width - Tread Center
6.25 ft 1930 mm
Length - Rear Axle to Bumper
6.5 ft 1993 mm
Transmission
Forward and Reverse - Range 3
17 mile/h 27 km/h
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Departure Angle
33 degrees
Engine
Note (1)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
Dimensions and Operating Specifications (Approximate) - 3.1 m3 (4.1 yd3) Bucket
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion? light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Cab
Note (1)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Note (2)
**Vary with tire.
Height - Ground Axle Center**
2.17 ft 685 mm
Note (1)
*Vary with bucket.
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4)
566 ft·lbf 768 N·m
Dimensions and Operating Specifications (Approximate) - 3.5 m3 (4.6 yd3) Bucket
Height - Ground Clearance**
1.25 ft 397 mm
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion? light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Tires
Other Choices Include
20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
4.8 s 4.8 s
Service Refill Capacities
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Units:USMetric
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
Optional Equipment
OPTIONAL EQUIPMENT

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549

国内自拍在线偷拍大学_2019在线情侣自拍视频_色999日韩偷自拍拍