Dozers

HomeIndustriesDozersModel Information

D6N Track-Type Tractor

Overview
Specifications
Equipment

Product Description

The latest in the line of Cat D6N dozers combines well-known versatility with a range of technology features to give you more job site productivity than ever before. A new transmission with lock-up clutch torque converter delivers ease of operation, increased net power, plus a 10-15 percent improvement in fuel efficiency. The D6N has the weight and horsepower you want for dozing applications and the balance and stability you need for finish grading – all in one easy-to-transport machine.

Product Specifications

UnitsUSMetric

 

Engine
Engine Model
Cat? C7.1 ACERT?
Flywheel Power
166 HP 124 kW
Bore
4.1 in 105 mm
Stroke
5.3 in 135 mm
Displacement
433 in3 7.1 l
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Engine Power - Maximum - At 2,200 rpm - ISO 14396
178 HP 133 kW
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
168 HP 124 kW
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)
180 HP 133 kW
Net Power - 1,800 rpm - ISO 9249/SAE J1349
166 HP 124 kW
Engine Power - Maximum - At 2,200 rpm - SAE J1995
182 HP 136 kW
Transmission
1.0 Forward
2.1 mile/h 3.3 km/h
1.5 Forward
2.7 mile/h 4.4 km/h
2.0 Forward
3.6 mile/h 5.8 km/h
2.5 Forward
4.7 mile/h 7.5 km/h
3.0 Forward
6.1 mile/h 9.8 km/h
0.7 Forward
1.7 mile/h 2.8 km/h
0.5 Reverse
1.9 mile/h 3.1 km/h
0.5 Forward
1.6 mile/h 2.5 km/h
1.0 Forward (EU)
1.9 mile/h 3 km/h
0.5 Forward (EU)
1.5 mile/h 2.4 km/h
2.7 Forward
5.2 mile/h 8.3 km/h
1.7 Forward
3 mile/h 4.9 km/h
0.7 Forward (EU)
1.6 mile/h 2.7 km/h
Service Refill Capacities
Fuel Tank
73.2 gal (US) 277 l
Cooling System
10.6 gal (US) 40 l
Final Drive - Each
1.8 gal (US) 7 l
Hydraulic Tank
7.8 gal (US) 29.5 l
Weights
Operating Weight
36943 lb 16757 kg
LGP VPAT - Landfill
3166 lb 1436 kg
XL SU - Blade
5732 lb 2600 kg
XL VPAT Landfill
2912 lb 1321 kg
Shipping Weight - LGP
39339 lb 17844 kg
Multi-Shank Ripper - With 3 Shanks
2959 lb 1342 kg
XL VPAT Foldable
2762 lb 1253 kg
Operating Weight - XL
36943 lb 16757 kg
LGP VPAT - Foldable
3287 lb 1491 kg
Shipping Weight - XL
36153 lb 16399 kg
LGP VPAT - Blade
2720 lb 1234 kg
XL VPAT Blade
2341 lb 1062 kg
Operating Weight - LGP
40446 lb 18346 kg
Undercarriage
Shoe Width - LGP
33.1 in 840 mm
Track on Ground - LGP
122.4 in 3110 mm
Note (1)
*ISO 16754
Shoes/Side - XL
40
Ground Pressure - XL*
6.7 psi 46.1 kPa
Ground Contact Area* - XL
5518 in2 3.56 m2
Track Gauge - LGP
85 in 2160 mm
Ground Contact Area* - LGP
8928 in2 5.76 m2
Track on Ground - XL
102.6 in 2605 mm
Track Gauge - XL
74.4 in 1890 mm
Track Rollers/Side - LGP
8
Ground Pressure - LGP*
4.5 psi 31.2 kPa
Grouser Height - LGP
2.2 in 57 mm
Grouser Height - XL
2.6 in 66 mm
Shoes/Side - LGP
46
Track Rollers/Side - XL
7
Shoe Width - XL
24 in 610 mm
Blades
Width - LGP VPAT - Foldable
13.42 ft 4080 mm
Width - XL VPAT
10.75 ft 3272 mm
Capacity - LGP VPAT - Foldable
5.1 yd3 3.9 m3
Capacity - LGP VPAT
5.1 yd3 3.9 m3
Width - LGP VPAT
13.42 ft 4080 mm
Capacity - XL VPAT
4.3 yd3 3.3 m3
Width - XL SU
10.33 ft 3154 mm
Capacity - XL SU
5.6 yd3 4.3 m3
Ripper
Maximum Clearance Raised - Shank Tip
24.5 in 622 mm
Weight - With Three Shanks
3444 lb 1562 kg
Maximum Penetration - XL
20.2 in 514 mm
Maximum Pry-out Force - LGP
38217 lbf 170 kN
Maximum Penetration Force - XL
11600 lbf 51.6 kN
Shank Gauge
6.6 ft 2 m
Maximum Penetration - LGP
15.6 in 398 mm
Pocket Spacing
3.3 ft 1000 mm
Maximum Pry-out Force - XL
47480 lbf 211.2 kN
Shank Section
73 mm × 176 mm (2.9 in × 6.9 in)
Each Additional Shank
172 lb 78 kg
Maximum Penetration Force - LGP
9667 lbf 43 kN
Type
Fixed Parallelogram
Number of Pockets
3
Overall Beam Width
86.7 in 2202 mm
Beam Cross Section
216 mm × 254 mm (8.5 in × 10.0 in)
Winch
Maximum Bare Drum - Line Speed
141 ft/min 43 m/min
Maximum Full Drum - Line Speed
217 ft/min 66.1 m/min
Rope Diameter - Recommended
0.875 in 22 mm
Maximum Full Drum - Line Pull*
44410 lb 20144 kg
Maximum Bare Drum - Line Pull*
69200 lb 31389 kg
Winch Drive
Mechanical
Drum Capacity - 22 mm (0.88 in)
288.75 ft 88 m
Overall Width
38.4 in 975 mm
Cable Ferrule Size - O.D. × Length
54 mm × 67 mm (2.13 in × 2.63 in)
Winch Model
PA55
Winch Case - Width
38.4 in 975 mm
Control
Electric
Oil Capacity
19.55 gal (US) 74 l
Winch and Bracket Length
45.1 in 1145 mm
Drum Diameter
10 in 254 mm
Drum Width
12.4 in 315 mm
Flange Diameter
19.8 in 504 mm
Standards
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes
Brakes meet the standard ISO 10265:2008.
Sustainability - Sound and Vibration Levels
Sound Levels - Maximum Sound Power Level - 2000/14/EC
110 dB(A) 110 dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008
76 dB(A) 76 dB(A)
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006
85.5 dB(A) 85.5 dB(A)
Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001
2.5 m/s2 (8.2 ft/s2)
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6
Less Than 0.7
Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006
0.5 m/s2 (1.6 ft/s2)
Transmission
1.0 Reverse
2.5 mile/h 4.1 km/h
1.5 Reverse
3.4 mile/h 5.4 km/h
2.0 Reverse
4.4 mile/h 7.1 km/h
2.5 Reverse
5.9 mile/h 9.5 km/h
3.0 Reverse
7.6 mile/h 12.2 km/h
Service Refill Capacities
Engine Crankcase
4.5 gal (US) 17 l
Power Train
42.3 gal (US) 160 l
Sound and Vibration - Cab
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (1)
The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: This dynamic operator sound pressure level is associated to a 2 dB(A) uncertainty.
Weights
Operating Weight - LGP Waste Handler
44749 lb 20298 kg
Transmission
1.7 Reverse
3.7 mile/h 6 km/h
Maximum Drawbar Pull - 3.0 Forward
25403 lbf 113 kN
Sound and Vibration - Cab
Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “EU Directives.” The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate. (2)
If equipped, the certification label – 110 dB(A) – is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in “2000/14/EC.” Your machine may have a different value.
Hydraulic Controls - Pressures
Maximum Steering Operating Pressure
6556 psi 45200 kPa
Undercarriage
Track on Ground - XL - Fine Grading
122.4 in 3110 mm
Weights
Shipping Weight - XL Waste Handler
40029 lb 18157 kg
Operating Weight - XL Waste Handler
40818 lb 18515 kg
Undercarriage
Ground Contact Area* - XL - Fine Grading
6479 in2 4.18 m2
Ground Pressure* - XL - Fine Grading
5.8 psi 40.3 kPa
Weights
Shipping Weight - LGP Waste Handler
43642 lb 19796 kg
Sound and Vibration - Cab
Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when “ANSI/SAE J1166 FEB2008” is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Transmission
Maximum Drawbar Pull - 1.0 Forward
71939 lbf 320 kN
0.7 Reverse (EU)
1.9 mile/h 3.1 km/h
Undercarriage
Track Rollers/Side - XL - Fine Grading
8
Hydraulic Controls - Pressures
Maximum Implement Operating Pressure
3640 psi 25100 kPa
Service Refill Capacities
DEF Tank
5 gal (US) 19 l
Weights
Shipping Weight - XL Fine Grading
37373 lb 16952 kg
Engine
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Undercarriage
Shoes/Side - XL - Fine Grading
46
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Transmission
2.7 Reverse
6.5 mile/h 10.5 km/h
Undercarriage
Grouser Height - XL - Fine Grading
2.6 in 66 mm
Hydraulic Controls - Pump
Pump Output - Steering
36.2 gal/min 137 l/min
Transmission
0.5 Reverse (EU)
1.8 mile/h 2.9 km/h
Hydraulic Controls - Pump
Angle Cylinder Flow - VPAT
33.5 gal/min 127 l/min
Lift Cylinder Flow
33.5 gal/min 127 l/min
Tilt Cylinder Flow
23.8 gal/min 90 l/min
Engine
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS? or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Hydraulic Controls - Pump
Pump Output - Implement
33.5 gal/min 127 l/min
Transmission
Maximum Drawbar Pull - 2.0 Forward
44512 lbf 198 kN
Undercarriage
Track Gauge - XL - Fine Grading
74.4 in 1890 mm
Engine
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Weights
Operating Weight - XL Fine Grading
38162 lb 17310 kg
Sound and Vibration - Cab
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment.
Winch
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Transmission
1.0 Reverse (EU)
2.2 mile/h 3.5 km/h
Hydraulic Controls - Pump
Ripper Cylinder Flow
33.5 gal/min 127 l/min
Engine
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Transmission
0.7 Reverse
2.1 mile/h 3.4 km/h
Undercarriage
Shoe Width - XL - Fine Grading
24 in 610 mm
Note (2)
All dimensions with SystemOne undercarriage.
Weights
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Service Refill Capacities
Roller Frames XL/LGP - Each
20/17.5 L (4.3/4.6 gal)
Sound and Vibration - Cab
Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the “SAE J88 FEB2006 – Constant Speed Moving Test” procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate gear ratio.”
Weights
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Winch
Note (2)
Slow and standard speed winches are available.
Weight*
2814 lb 1276.5 kg
Units:USMetric
Standard Equipment
POWER TRAIN
UNDERCARRIAGE
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
TECHNOLOGY PRODUCTS
OTHER STANDARD EQUIPMENT
Optional Equipment
POWER TRAIN
UNDERCARRIAGE
TRACKS
TRACK GUIDING GUARDS
REAR CONTROL PACKAGES
FAN AND COOLING
WEATHER PACKAGES AND BATTERIES
TECHNOLOGY PRODUCTS
FUEL SYSTEMS
GUARDS
REAR ATTACHMENTS
REAR HYDRAULICS
BULLDOZER PACKAGES
BLADES
LIGHTS
OPERATOR ENVIRONMENT
HYDRAULIC OIL
STARTERS, BATTERIES, AND ALTERNATORS
GUARDS – CAB PROTECTION
FLUIDS
OTHER ATTACHMENTS
MAINTENANCE AND RELATED ATTACHMENTS
SPECIAL ARRANGEMENTS

Used Equipment Rent Equipment

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549

国内自拍在线偷拍大学_2019在线情侣自拍视频_色999日韩偷自拍拍